Torque Arm Kit

The TCP Torque Arm is a bolt-on, pinion angle adjustable, traction device that can be used with our rear pushrod or factory leaf spring suspensions. Similar to traction bars, the arm converts torque to downward force at the tires, but has the benefit of providing improved traction during both straight line and cornering acceleration. Installation is a direct bolt-on when used with our subframe connector system (‘64-’70 Mustangs, ‘67-’70 Cougars) and specific bolt-in FAB9™ fabricated 9” housing. Torque arms can also be installed on most Ford 9” and 8" equipped vehicles but, will require an additional weld-in bracket kit (TCP TABKT-X) and crossmember fabrication. A bolt-on welding fixture (TCP TABKT-1) is also available to correctly position the mounting tabs.

(Requires installed TCP SUBCS-01, TCP SUBCS-03 or fabricated crossmember)

Torque Arm Kits:
TCP TA2F9-33 ('64-'70 Mustang)
TCP TA2F9-36 ('67-'70 Cougar)

Bracket Sets:
TCP TABKT-3 (FAB9™)
TCP TABKT-2 (OEM Ford 9")
TCP TABKT-4 (OEM Ford 8")

Installation Tool:
TCP TABKT-1 (Welding Fixture)

Related Links:

• Subframe Connectors
• Pushrod Suspension System
• Rear Spring Plate

Applications:

• 1965 - 1970 Mustang, Cougar
  (9" Rear Ends only)

Includes:

Torque Arm, "DogBone" End Link, Pinion Angle Adjuster, Mounting Hardware, Installation Instructions

Some installations may require additional bracket set and installation welding jig.

All specifications and prices listed throughout the website and linked documents are subject to change.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

© 2018 Total Control Products - A Chris Alston's Chassisworks, Inc. Brand

Toll Free: 888.388.0298